Tobias YoungJoinery & Maintenance
Timber + composite · Nottingham
Timber and composite decking designed and installed around the shape, levels, access and intended use of your garden — with a clean, considered finish.
Decking installation
A good deck needs to work with the garden rather than simply fill an area. We plan the layout around the space available, access routes, changes in level and how you want to use it.
That can mean a new seating or dining area, replacing an existing deck, creating steps between levels or choosing a different board material for a lower-maintenance finish. Timber and composite options can both be considered before the final specification is agreed.
Real project
These photographs show a timber decking project during construction, including the supporting frame and the board installation. Showing the work in progress gives a clearer picture of the structure beneath the finished surface.
Timber or composite
Timber decking
Timber provides a traditional natural finish and gives plenty of flexibility around shapes, edges, steps and changes in level. The exact timber and treatment can be selected to suit the project and desired finish.
Composite decking
Composite decking is often chosen where a consistent appearance and reduced routine maintenance are priorities. Board systems vary, so spacing, fixings and installation details should follow the chosen manufacturer's instructions.
Built around the garden
The finished surface is only part of the job. The supporting structure, board layout, access, edges, steps, ventilation and water management all need to be considered before installation begins.
Built for durability
A deck can look good on day one but the long-term performance depends heavily on the frame beneath it. We use robust structural timber and additional protective details to help the substructure cope with outdoor exposure and the British weather.
UC4 structural timber
For timber decking substructures we use UC4 pressure-treated structural timber. UC4 is the treatment class recommended for timber providing exterior structural support, including deck joists, beams and posts. It provides a higher level of preservative protection for timber exposed to demanding outdoor conditions or positioned close to the ground.
Joist protection tape
We apply quality self-sealing decking tape to the top faces of the timber joists before the boards are fitted. This creates an additional moisture-resistant barrier at the board-to-joist interface and helps protect the timber around fixing points where water could otherwise find its way into the frame.
Cut-end treatment
When pressure-treated timber is cross-cut or notched, the newly exposed end grain is treated with a suitable cut-end wood preservative. This helps maintain protection at the areas where factory-treated timber has been cut during construction.
How it works
We look at the garden, access, levels, approximate size and any existing deck or structure.
We discuss timber or composite, the intended use, board direction, steps and the overall finish.
The proposed work, material allowance and relevant removal or preparation are set out before work starts.
The deck is set out and installed, followed by the final details and a tidy handover of the work area.
Nottingham decking
Based in Colwick, we undertake decking projects in Nottingham and surrounding areas including Carlton, Gedling, Mapperley, Arnold, West Bridgford, Beeston, Wollaton and Hucknall, as well as other nearby locations.
If you are replacing an old deck or planning a new outdoor area, send us the location, approximate size and any photographs you have. We can then arrange the next step and provide a quotation.
Frequently asked questions
For timber decking frames we use UC4 pressure-treated structural timber. UC4 refers to the preservative treatment/use class rather than the timber strength grade; the structural grade and section size are selected to suit the layout and span. We also use joist protection tape and treat exposed cut ends as additional measures to help protect the substructure.
Yes. We can discuss timber and composite options for decking projects in Nottingham and help you choose a suitable approach for the space, appearance and level of ongoing maintenance you want.
Neither is automatically better for every garden. Timber gives a natural appearance and plenty of design flexibility. Composite is often chosen for its consistent finish and lower routine maintenance. Cost, appearance, board system and the way the area will be used all affect the choice.
Yes, although routine maintenance is generally lower than for timber. Outdoor decking still needs regular cleaning to remove dirt, leaves, algae and other debris. Any product-specific care should follow the manufacturer's guidance.
Yes. We can assess an existing deck and quote for replacement where appropriate. The condition of the existing substructure, access and any disposal required can be considered as part of the quotation.
The price depends on the deck size, timber or composite board choice, the supporting structure, site preparation, height, steps, edges and access. We prefer to assess the actual space before giving a firm quotation rather than advertise a generic square-metre price that may not reflect the project.
Many domestic decking projects can fall within permitted development, subject to conditions. Planning Portal guidance includes limits relating to height, garden coverage and position, and additional rules can apply in some locations or to particular properties. Raised or unusual schemes should be checked before work starts.
Planning Portal decking guidance ↗Request a quote
Tell us where the project is, the approximate size and whether you are considering timber, composite or would like to discuss both.